快捷搜索:  as  test  1111  test aNd 8=8  test++aNd+8=8  as++aNd+8=8  as aNd 8=8

太阳娱乐网址古天乐代言:SYBASE 11.0.0 For SCO Unix安装手册



SYBASE SYSTEM 11.0.0 for SCO UNIX 5.0.5

安 装 说 明

1.首先必须确定网卡已精确地设置设置设备摆设摆设在系统上。

2.以root登录,用scoadmin敕令创建Sybase用户,组属为Sybase

确定上述二部骤无误之后,我们可以转入一阶段地安装事情。

3.login:root

# divvy

系统 子分区表(试举例)

NameTypeNew Fs#Fist BlockLast Block

bootEAFSno0019999

swapNON FSno120000109999

rootHTFSno211000709999

/uHTFSno37100001309999

raw1NON FSno4--

raw2NON FSno5--

recoverNON FSno621104542110463

hd0WHOLE DISKno702111471

raw1和raw2是Sybase的数据库设备实际寄放的物理设备名称。raw1用来寄放数据库,raw2用来寄放事务日志。

在这里我们精确地分配raw1和raw2的大年夜小:

假设我们定义raw1=600M, raw2=200m。

nName or renawe a divishon

cCredit a new file system on this divison

tSelect or change filesystem type on new filesystem

pPrevent a new file system from being crented on the division

sStart a division on a different block

eEnd a division on a different block

rRestore the original division table

Enter you choice or q to Quit_____ n ↙

Whick division (o through 7): 4 ↙

What do your want to call it?:raw1 ↙

定义肇端块,按必要设定肇端块:

Enter you choice or q Quit: S ↙

Whick division ? :4 ↙

Start number block:1310000 ↙

(建议:boot 的大年夜小为20MB,u文件系统的大年夜小为500MB)

同上,如斯类推定义raw2后,屏幕应提示

NameTypeNew Fs#Fist BlockLast Block

bootEAFSno0019999

swapNON FSno120000109999

rootHTESno211000709999

/uEAFSno37100001309999

raw1NON FSno413100001910000

raw2NON FSno519100012110001

recoverNON FSno621104542110太阳娱乐网址古天乐代言463

hd0aWHOLE DISKno702111471

Enter you choice or q to Quit q ↙

系统提示:

iInstall the division set_up shown

rRetarn to the previous menu

eexit without installing a division table

Enter your choice or q to Quit i ↙

然后,筹备物理设备raw1, raw2,在root下将raw1, rraw1, raw2, rraw2的属性及组名变动为sybase,并且权限为666

# cd dev ↙

# chown sybase raw* rraw* ↙

# chgrp sybase raw* rraw* ↙

# chmod 666 raw* rraw* ↙

然退却撤退出以Sybase用户登录系统

$ mkdir install ↙

$ cd install ↙

$ tar xv6 sco_kernel.scr ↙

把光盘插入CD_ROM将它安装进文件系统,以root登录。

# mount /dev/cd0 /mnt ↙

再次以Sybase用户登录:

$ cd /mnt

$ sybload -D ↙

current directory is "/mnt"设置安装的路径

Is this the correct directory for installation?

If so, Please enter 'y' or 'n' : n ↙

Please specify the correct installation directory here

A null entry will terminate this installation: /u/sybase ↙

Current directory is "/u/Sybase"

Is this the correct directory for installation?

If so, Please enter 'Y' or 'Y' : y

设置安装的要领:Is this a local or Remote in installation, as defined in your installation Guide?

Please enter L for Local or R for Remote.

> L ↙

Please enter the full name of the disk file of the global archive : > /mnt/sybimage ↙

Yor specified /mnt/sybimage for the media device, Is this correct? Please enter 'y' or 'Y' to continue: y

紧追跟着系统将会提示你输入Sybase产品的序列号(CAS):

CAS:DVBYBY SOKOBY BYBYBD BYBKBK BZTWLO BJVL ↙

精确输入序列号后,会供给一串可供安装的菜单项

选择1:Sybase 11.0之后回车

可把光盘上的Sybase安装至/u/Sybase之下。

至此,Sybase已安装至硬盘上面,我们可以进行设置方面地事情。

$ pwd ↙ $/mnt

$ cd.. ↙ 退出mnt目录。

首先, 要把在/mnt下的sybase拆卸掉落,我们以root登录,履行# umount /dev/cd0 ↙ 即可

然后# cd /u/sybase/install ↙ “设置情况变量

# SYBASE = /u/sybase; export SYBASE ↙

增大年夜SHMMAX的大年夜小

# 从新链接内核 sh ./sco_kernel.scr sybase ↙

# cd /etc/conf/cf.d ↙

# vi stune

删掉落MAXPMEM 0该行后,存盘退出

# vi mtune

改动NAIOHBUF该行,将50改动成500后,存盘退出

# cd /etc/conf/pack.d /itimer ↙

# cp space.c.presyb space.c ↙

# vi space.c

改动该行int alarm_accuracy设为即是-1;

# cd /usr/lib

# cp aiomemlock. presyb aiomemlock ↙

# vi aiomemlock (在该文件末增添一行sybase 28000000)

# cd /etc/conf/sdevice.d

# vi aio

将该文件重覆的两行删掉落一行后,存盘退出

# vi suds

将suds该行的N,改为Y后存盘退出

# cd /etc/rc2.d

# vi S99*

在#字符下一行的行首加入一句: /etc/suds_ctrl -a 100

该100为Sybase的组号,做完此步之后

链接内核从新启动后,从新进入Sybase用户

$ cd install

$ sybinit

此时,请参考附页1,将参数设置精确,提示安装成功即可。

附页1

注:鄙人文中每屏信息由横线隔开,在

----------------------------------------------------------------------------

CONFIGURE SERVER PRODUCTS

Product Date Installed Date Configured

1. SQL Server Jun 09 96 14:35 Jun 13 96 17:30

2. Backup Server Jun 09 96 14:35 Jun 13 96 17:32

Ctrl-a Accept and Continue, Ctrl-x Exit Screen, ? Help.

Enter the number of your choice and press return:

----------------------------------------------------------------------------

NEW OR EXISTING SQL SERVER

1. Configure a new SQL Server

2. Configure an existing SQL Server

Ctrl-a Accept and Continue, Ctrl-x Exit Screen, ? Help.

Enter the number of your choice and press return:

----------------------------------------------------------------------------

ADD NEW SQL SERVER

1. SQL Server name:SYBASE

Ctrl-a Accept and Continue, Ctrl-x Exit Screen, ? Help.

Enter the name of the new SQL Server (default is 'SYBASE'):

----------------------------------------------------------------------------

ADD NEW SQL SERVER

1. SQL Server name:SYBASE

Ctrl-a Accept and Continue, Ctrl-x Exit Screen, ? Help.

Enter the number of your choice and press return:

----------------------------------------------------------------------------

SERVER INTERFACES FILE ENTRY SCREEN

Server name: SYB_BACKUP

1. Retry Count: 3

2. Retry Delay: 3

3. Add a new listener service

Modify or delete a service

Listener services available:

Protocol Address Port Name Alias

4. tcp credit.credit.C 7372

Ctrl-a Accept and Continue, Ctrl-x Exit Screen, ? Help.

Enter the number of your choice and press return:

Write the changes to the interfaces file now?

----------------------------------------------------------------------------

BACKUP SERVER CONFIGURATION

1. Backup Server errorlog: /u/sybase/install/backup.log

2. Enter / Modify Backup Server interfaces file information

Ctrl-a Accept and Continue, Ctrl-x Exit Screen, ? Help.

Enter the number of your choice and press return:

Execute the Backup Server configuration now?

----------------------------------------------------------------------------

Running task to update the Backup Server runserver file.

Task jto update the Backup Server runserver file succeeded.

Running task to boot the Backup Serve.

waiting for server 'SYB_BACKUP' to boot...

Task to boot the Backup Server succeeded.

Configuration completed successfully.

Pressto continue.

-------------------------------------------------------------------------

NEW OR EXISTING BACKUP SERVER

1. Configure a new Backup Server

2. Configure an existing Backup Server

Ctrl-a Accept and Continue, Ctrl-x Exit Screen, ?Help

Enter the number of your choice and press return:

-----------------------------------------------------------------------------

CONFIGURE SERVER PRODUCTS

Product Date Installed Date Configured

1. SQL Server Jun 09 96 14:35 Jun 13 96 17:30

2. Backup Server Jun 09 96 14:35 Jun 13 96 17:32

Ctrl-a Accept and Continue, Ctrl-x Exit Screen, ? Help.

Enter the number of your choice and press return:

---------------------------------------------------------------------------

SYBINIT

1. Release directory: /u/sybase

2. Edit / View Interfaces File

3. Configure a Server product

4. Configure an Open Client/Server product

5. Configure a Front End product

Ctrl-a Accept and Continue, Ctrl-x Exit Screen, ? Help.

Enter the number of your choice and press return:

----------------------------------------------------------------------------

Exiting.

The log file for this session is '/u/sybase/init/logs/log0613.024'.

SQL SERVER CONFIGURATION

1. CONFIGURE SERVER'S INTERFACES FILE ENTRY Incomplete

2. MASTER DEVICE CONFIGURATION Incomplete

3. SYBSYSTEMPROCS DATABASE CONFIGURATION Incomplete

4. SET ERRORLOG LOCATION Incomplete

5. CONFIGURE DEFAULT BACKUP SERVER Incomplete

6. CONFIGURE LANGUAGES Incomplete

7. CONFIGURE CHARACTER SETS Incomplete

8. CONFIGURE SORT ORDER Incomplete

9. ACTIVATE AUDITING Incomplete

Ctrl-a Accept and Continue, Ctrl-x Exit Screen, ? Help.

Enter the number of your choice and press return:

----------------------------------------------------------------------------

SERVER INTERFACES FILE ENTRY SCREEN

Server name: SYBASE

1. Retry Count: 0

2. Retry Delay: 0

3. Add a new listener service

Ctrl-a Accept and Continue, Ctrl-x Exit Screen, ? Help.

Enter the number of your choice and press return:

Enter the retry count (default is '0'):

----------------------------------------------------------------------------

SERVER INTERFACES FILE ENTRY SCREEN

Server name: SYBASE

1. Retry Count: 3

2. Retry Delay: 0

3. Add a new listener service

Ctrl-a Accept and Continue, Ctrl-x Exit Screen, ? Help.

Enter the number of your choice and press return:

Enter the delay interval between retries (default is '0'):

----------------------------------------------------------------------------

SERVER INTERFACES FILE ENTRY SCREEN

Server name: SYBASE

1. Retry Count: 3

2. Retry Delay: 3

3. Add a new listener service

Ctrl-a Accept and Continue, Ctrl-x Exit Screen, ? Help.

Enter the number of your choice and press return:

----------------------------------------------------------------------------

NEW OR EXISTING SQL SERVER

1. Configure a new SQL Server

2. Configure an existing SQL Server

Ctrl-a Accept and Continue, Ctrl-x Exit Screen, ? Help.

Enter the number of your choice and press return:

-----------------------------------------------------------------------------

CONFIGURE SERVER PRODUCTS

Product Date Installed Date Configured

1. SQL Server Jun 09 96 14:35 Jun 13 96 17:30

2. Backup Server Jun 09 96 14:35 Jun 13 96 17:32

Ctrl-a Accept and Continue, Ctrl-x Exit Screen, ? Help.

Enter the number of your choice and press return:

----------------------------------------------------------------------------

NEW OR EXISTING BACKUP SERVER

1. Configure a new Backup Server

2. Configure an existing Backup Server

Ctrl-a Accept and Continue, Ctrl-x Exit Screen, ? Help.

Enter the number of your choice and press return:

----------------------------------------------------------------------------

ADD NEW BACKUP SERVER

1. Backup Server name:SYB_BACKUP

Ctrl-a Accept and Continue, Ctrl-x Exit Screen, ? Help.

Enter the number of your choice and press return:

----------------------------------------------------------------------------

BACKUP SERVER CONFIGURATION

1. Backup Server errorlog: /u/sybase/install/backup.log

2. Enter / Modify Backup Server interfaces file information

Ctrl-a Accept and Continue, Ctrl-x Exit Screen, ? Help.

Enter the number of your choice and press return:

----------------------------------------------------------------------------

SERVER INTERFACES FILE ENTRY SCREEN

Server name: SYB_BACKUP

1. Retry Count: 0

2. Retry Delay: 0

3. Add a new listener service

Ctrl-a Accept and Continue, Ctrl-x Exit Screen, ? Help.

Enter the number of your choice and press return:

Enter the retry count (default is '0'):

----------------------------------------------------------------------------  SERVER INTERFACES FILE ENTRY SCREEN

Server name: SYB_BACKUP

1. Retry Count: 3

2. Retry Delay: 0

3. Add a new listener service

Ctrl-a Accept and Continue, Ctrl-x Exit Screen, ? Help.

Enter the number of your choice and press return:

Enter the delay interval between retries (default is '0'):

----------------------------------------------------------------------------

SERVER INTERFACES FILE ENTRY SCREEN

Server name: SYB_BACKUP

1. Retry Count: 3

2. Retry Delay: 3

3. Add a new listener service

Ctrl-a Accept and Continue, Ctrl-x Exit Screen, ? Help.

Enter the number of your choice and press return:

----------------------------------------------------------------------------

EDIT TCP SERVICE

1. Hostname/Address: credit.credit.COM

2. Port:

3. Name Alias:

4. Delete this service from the interfaces entry

Ctrl-a Accept and Continue, Ctrl-x Exit Screen, ? Help.

Enter the number of your choice and press return:

Enter the port number to use for this entry (default is ''):

------------太阳娱乐网址古天乐代言----------------------------------------------------------------

EDIT TCP SERVICE

1. Hostname/Address: credit.credit.COM

2. Port: 7372

3. Name Alias:

4. Delete this service from the interfaces entry

Ctrl-a Accept and Continue, Ctrl-x Exit Screen, ? Help.

Enter the number of your choice and press return:

Is this information is correct?

-----------------------------------------太阳娱乐网址古天乐代言-----------------------------------

SQL SERVER CONFIGURATION

1. CONFIGURE SERVER'S INTERFACES FILE ENTRY Complete

2. MASTER DEVICE CONFIGURATION Complete

3. SYBSYSTEMPROCS DATABASE CONFIGURATION Complete

4. SET ERRORLOG LOCATION Complete

5. CONFIGURE DEFAULT BACKUP SERVER Complete

6. CONFIGURE LANGUAGES Complete

7. CONFIGURE CHARACTER SETS Complete

8. CONFIGURE SORT ORDER Complete

9. ACTIVATE AUDITING Complete

Ctrl-a Accept and Continue, Ctrl-x Exit Screen, ? Help.

Enter the number of your choice and press return:

Execute the SQL Server Configuration now?

---------------------------------------------------------------------------

Running task to create the master device.

Building the master device

...................................Done

Task to create the msster device succeeded.

Running task jto boot the SQL Server.

Task to boot the SQL Server succeeded.

Running task to create the sybsystemprocs database.

sybsystemprocs database created.

Task to created the sybsystemprocs database succeeded.

Running task to install system stored procedures.

............................................................................

.....................................................

Task to install system stored procedures succeeded.

Running task to set permissions for the 'model' database.

.Done

Task to set permissions for the 'model' database succeeded.

Running task to set the default character set and/or default sort order for the

SQL Server.

Setting the default character set to iso_1

Sort order 'binary' has already been installed.

Character set 'iso_1' is already is default.

Sort order 'binary' is already the default.

Task to set the default character set and/or default sort order for the SQL

Server succeeded.

Running task to set the default language.

Setting the default language to us_english.

Language 'us_english' is already the default.

Task to set the default language succeeded.

Configuration completed successfully.

Pressto continue.

-----------------------------------------------------------------------------

EDIT TCP SERVICE

1. Hostname/Address: credit.credit.COM

2. Port:

3. Name Alias:

4. Delete this service from the interfaces entry

Ctrl-a Accept and Continue, Ctrl-x Exit Screen, ? Help.

Enter the number of your choice and press return:

Enter the port number to use for this entry (default is ''):

----------------------------------------------------------------------------

EDIT TCP SERVICE

1. Hostname/Address: credit.credit.COM

2. Port: 7371

3. Name Alias:

4. Delete this service from the interfaces entry

Ctrl-a Accept and Continue, Ctrl-x Exit Screen, ? Help.

Enter the number of your choice and press return:

Is this information is correct?

----------------------------------------------------------------------------

SERVER INTERFACES FILE ENTRY SCREEN

Server name: SYBASE

1. Retry Count: 3

2. Retry Delay: 3

3. Add a new listener service

Modify or delete a service

Listener services available:

Protocol Address Port Name Alias

4. tcp credit.credit.COM 7371

Ctrl-a Accept and Continue, Ctrl-x Exit Screen, ? Help.

Enter the number of your choice and press return:

Write the changes to the interfaces file now?

----------------------------------------------------------------------------

SQL SERVER CONFIGURATION

1. CONFIGURE SERVER'S INTERFACES FILE ENTRY Complete

2. MASTER DEVICE CONFIGURATION Incomplete

3. SYBSYSTEMPROCS DATABASE CONFIGURATION Incomplete

4. SET ERRORLOG LOCATION Incomplete

5. CONFIGURE DEFAULT BACKUP SERVER Incomplete

6. CONFIGURE LANGUAGES Incomplete

7. CONFIGURE CHARACTER SETS Incomplete

8. CONFIGURE SORT ORDER Incomplete

9. ACTIVATE AUDITING Incomplete

Ctrl-a Accept and Continue, Ctrl-x Exit Screen, ? Help.

Enter the number of your choice and press return:

----------------------------------------------------------------------------

CONFIGURE SORT ORDER

Current default language: us_english

Current default character set: ISO 8859-1 (Latin-1) - Westen European

8-bitcharacter set.

Current sort order: Binary ordering, for the ISO 8859/1 or Latin-1

character set (iso_1).

Select a sort order.

SortOrder Chosen

1. Binary ordering, for the ISO 8859/1 or Latin-1 characterset set (is yes

2. General purpose dictionary ordering. no

3. Dictionary order, case insensitive, accent insensitive. no

4. Dictionary order, case insensitive. no

5. Dictionary order, case insensitive with preference. no

Ctrl-a Accept and Continue, Ctrl-x Exit Screen, ? Help.

Enter the number of your choice and press return:

------------------------------------------------------------------------------

SQL SERVER CONFIGURATION

1. CONFIGURE SERVER'S INTERFACES FILE ENTRY Complete

2. MASTER DEVICE CONFIGURATION Complete

3. SYBSYSTEMPROCS DATABASE CONFIGURATION Complete

4. SET ERRORLOG LOCATION Complete

5. CONFIGURE DEFAULT BACKUP SERVER Complete

6. CONFIGURE LANGUAGES Complete

7. CONFIGURE CHARACTER SETS Complete

8. CONFIGURE SORT ORDER Complete

9. ACTIVATE AUDITING Incomplete

Ctrl-a Accept and Continue, Ctrl-x Exit Screen, ? Help.

Enter the number of your choice and press return:

---------------------------------------------------------------------------

ACTIVATE AUDITING

1. Install auditing: no

2. sybsecurity database size (Meg): 5

3. sybsecurity logical device name: sybsecurity

4. creat new device for the sybsecurity database: no

Ctrl-a Accept and Continue, Ctrl-x Exit Screen, ? Help.

Enter the number of your choice and press return:

------------------------------------------------------------------------------

SQL SERVER CONFIGURATION

1. CONFIGURE SERVER'S INTERFACES FILE ENTRY Complete

2. MASTER DEVICE CONFIGURATION Complete

3. SYBSYSTEMPROCS DATABASE CONFIGURATION Complete

4. SET ERRORLOG LOCATION Complete

5. CONFIGURE DEFAULT BACKUP SERVER Complete

6. CONFIGURE LANGUAGES Complete

7. CONFIGURE CHARACTER SETS Incomplete

8. CONFIGURE SORT ORDER Incomplete

9. ACTIVATE AUDITING Incomplete

Ctrl-a Accept and Continue, Ctrl-x Exit Screen, ? Help.

Enter the number of your choice and press return:

---------------------------------------------------------------------------

CONFIGURE CHARACTER SETS

Current default language: us_english

Current default character set: ISO 8859-1 (Latin-1) - Westen European

8-bitcharacter set.

Current sort order: Binary ordering, for the ISO 8859/1 or Latin-1

character set (iso_1).

Select the character set you want to install, remove, or designate as the

default character set.

Character set Installed? Remove Install Make default

1. ASCII, for use with unsp yesno no no

2. Code Page 437, (United S nono no no

3. Code Page 850 (Multiling nono no no

4. ISO 8859-1 (Latin-1) - W yesno no yes

5. Macintosh default charac nono no no

6. Hewlett-Packard propriet nono no no

Ctrl-a Accept and Continue, Ctrl-x Exit Screen, ? Help.

Enter the number of your choice and press return:

--太阳娱乐网址古天乐代言--------------------------------------------------------------------------

SQL SERVER CONFIGURATION

1. CONFIGURE SERVER'S INTERFACES FILE ENTRY Complete

2. MASTER DEVICE CONFIGURATION Complete

3. SYBSYSTEMPROCS DATABASE CONFIGURATION Complete

4. SET ERRORLOG LOCATION Complete

5. CONFIGURE DEFAULT BACKUP SERVER Complete

6. CONFIGURE LANGUAGES Complete

7. CONFIGURE CHARACTER SETS Complete

8. CONFIGURE SORT ORDER Incomplete

9. ACTIVATE AUDITING Incomplete

Ctrl-a Accept and Continue, Ctrl-x Exit Screen, ? Help.

Enter the number of your choice and press return:

---------------------------------------------------------------------------

MASTER DEVICE CONFIGURATION

1. Master Device:

2. Size (Meg): 29.299805

(建议:Master Device最好放在裸设备/dev/rraw1下)

Ctrl-a Accept and Continue, Ctrl-x Exit Screen, ? Help.

Enter the number of your choice and press return:

----------------------------------------------------------------------------

MASTER DEVICE CONFIGURATION

1. Master Device:

2. Size (Meg): 29.299805

Ctrl-a Accept and Continue, Ctrl-x Exit Screen, ? Help.

Enter the number of your choice and press return:

Enter the size of the SQL sever's master device in megabutes:40

----------------------------------------------------------------------------------

MASTER DEVICE CONFIGURATION

1. Master Device:

2. Size (Meg): 40

Ctrl-a Accept and Continue, Ctrl-x Exit Screen, ? Help.

Enter the number of your choice and press return:

----------------------------------------------------------------------------------

SQL SERVER CONFIGURATION

1. CONFIGURE SERVER'S INTERFACES FILE ENTRY Complete

2. MASTER DEVICE CONFIGURATION Complete

3. SYBSYSTEMPROCS DATABASE CONFIGURATION Incomplete

4. SET ERRORLOG LOCATION Incomplete

5. CONFIGURE DEFAULT BACKUP SERVER Incomplete

6. CONFIGURE LANGUAGES Incomplete

7. CONFIGURE CHARACTER SETS Incomplete

8. CONFIGURE SORT ORDER Incomplete

9. ACTIVATE AUDITING Incomplete

Ctrl-a Accept and Continue, Ctrl-x Exit Screen, ? Help.

Enter the number of your choice and press return:

---------------------------------------------------------------------------

SYBSYSTEMPROCS DATABASE CONFIGURATION

1. sybsystemprocs database size (Meg): 16

2. sybsystemprocs logical device name: sysprocsdev

3. create new device for the sybsystemprocs database: yes

4. physical name of new device:

5. size of the new device (Meg): 16

Ctrl-a Accept and Continue, Ctrl-x Exit Screen, ? Help.

Enter the number of your choice and press return:

Enter the physical device name for the sybsystemprocs database:

(建议:sybsystemprocs database放在裸设备/dev/rraw2下)

---------------------------------------------------------------------------

SET THE SQL SERVER'S BACKUP SERVER

1. SQL Server Backuup Server name: SYB_BACKUP

Ctrl-a Accept and Continue, Ctrl-x Exit Screen, ? Help.

Enter the number of your choice and press return:

----------------------------------------------------------------------------

SQL SERVER CONFIGURATION

1. CONFIGURE SERVER'S INTERFACES FILE ENTRY Complete

2. MASTER DEVICE CONFIGURATION Complete

3太阳娱乐网址古天乐代言. SYBSYSTEMPROCS DATABASE CONFIGURATION Complete

4. SET ERRORLOG LOCATION Complete

5. CONFIGURE DEFAULT BACKUP SERVER Complete

6. CONFIGURE LANGUAGES Incomplete

7. CONFIGURE CHARACTER SETS Incomplete

8. CONFIGURE SORT ORDER Incomplete

9. ACTIVATE AUDITING Incomplete

Ctrl-a Accept and Continue, Ctrl-x Exit Screen, ? Help.

Enter the number of your choice and press return:

---------------------------------------------------------------------------

CONFIGURE LANGUAGES

Current default language: us_english

Current default character set: ISO 8859-1 (Latin-1) - Westen European

8-bitcharacter set.

Current sort order: Binary ordering, for the ISO 8859/1 or Latin-1

character set (iso_1).

Select the language you want to install, remove, or designate as the default

language.

Language Installed? Remove Install Make default

1. us_english yes no no yes

Ctrl-a Accept and Continue, Ctrl-x Exit Screen, ? Help.

Enter the number of your choice and press return:

----------------------------------------------------------------------------

SYBSYSTEMPROCS DATABASE CONFIGURATION

1. sybsystemprocs database size (Meg): 16

2. sybsystemprocs logical device name: sysprocsdev

3. create new device for the sybsystemprocs database: yes

4. physical name of new device: /u/sybase/data/sysprocs.dat

5. size of the new device (Meg): 16

Ctrl-a Accept and Continue, Ctrl-x Exit Screen, ? Help.

Enter the number of your choice and press return:

----------------------------------------------------------------------------

SQL SERVER CONFIGURATION

1. CONFIGURE SERVER'S INTERFACES FILE ENTRY Complete

2. MASTER DEVICE CONFIGURATION Complete

3. SYBSYSTEMPROCS DATABASE CONFIGURATION Complete

4. SET ERRORLOG LOCATION Incomplete

5. CONFIGURE DEFAULT BACKUP SERVER Incomplete

6. CONFIGURE LANGUAGES Incomplete

7. CONFIGURE CHARACTER SETS Incomplete

8. CONFIGURE SORT ORDER Incomplete

9. ACTIVATE AUDITING Incomplete

Ctrl-a Accept and Continue, Ctrl-x Exit Screen, ? Help.

Enter the number of your choice and press return:

---------------------------------------------------------------------------

SET ERRORLOG LOCATION

1. SQL Server errlrlog: /u/sybase/install/errorlog

Ctrl-a Accept and Continue, Ctrl-x Exit Screen, ? Help.

Enter the number of your choice and press return:

---------------------------------------------------------------------------

SQL SERVER CONFIGURATION

1. CONFIGURE SERVER'S INTERFACES FILE ENTRY Complete

2. MASTER DEVICE CONFIGURATION Complete

3. SYBSYSTEMPROCS DATABASE CONFIGURATION Complete

4. SET ERRORLOG LOCATION Complete

5. CONFIGURE DEFAULT BACKUP SERVER Incomplete

6. CONFIGURE LANGUAGES Incomplete

7. CONFIGURE CHARACTER SETS Incomplete

8. CONFIGURE SORT ORDER Incomplete

9. ACTIVATE AUDITING Incomplete

Ctrl-a Accept and Continue, Ctrl-x Exit Screen, ? Help.

Enter the number of your choice and press return:

---------------------------------------------------------------------------

免责声明:以上内容源自网络,版权归原作者所有,如有侵犯您的原创版权请告知,我们将尽快删除相关内容。

您可能还会对下面的文章感兴趣: